Thingiverse
Tarantula PSU Case
di teesider61
29
Download
15
Likes
0
Makes
Designed to work with this switch https://www.banggood.com/1pcs-10A-250V-3Pin-IEC320-C14-Inlet-Module-Plug-Fuse-With-Switch-Male-Power-Socket-p-1120059.html?
I made this with 2 parts in order to lie the PSU out of the way at the back of the machine and have easy access to the switch. Added benefit is that the fan blows away from the build plate
There is an extra 5mm hole at the top of the unit for the cable to the part cooling fan to ensure it is long enough to reach maximum print height. Power cable and permanent fan exit the box via a channel in the base
The stl file includes two extended corners to ensure warp free printing with ABS. These can be easily removed when the print is completed. Added a file without the extended corners which prints well in PLA
This design only really works if you intend to screw the unit to a base board
I made this with 2 parts in order to lie the PSU out of the way at the back of the machine and have easy access to the switch. Added benefit is that the fan blows away from the build plate
There is an extra 5mm hole at the top of the unit for the cable to the part cooling fan to ensure it is long enough to reach maximum print height. Power cable and permanent fan exit the box via a channel in the base
The stl file includes two extended corners to ensure warp free printing with ABS. These can be easily removed when the print is completed. Added a file without the extended corners which prints well in PLA
This design only really works if you intend to screw the unit to a base board
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!