TARDIS Raspberry PI 3 case revised

This is a modified version of https://www.thingiverse.com/thing:3155976
which can be assembled with pins and can be illuminated inside and on top
Holes can be drilled up to 4 mm and span pins 4mm or 4 mm allen schrews or similar can be used to fix parts in position, I used Notchpins DIN1473 4x15 and drilled up Body1 to 4.5 mm

How to print

DontPrintThis: You can have an X-ray view of the whole case, it is slightly different at Base and Lamp

Body1: with supports, infill 10%, it is recommended to use support blocker at the 4 M3- holes on the back, 0.2 mm layers - the big hole near power supply is for network cable
Support is only needed in the cutout for the board - I will redesingn it that it can be printed without any supports

Body2: without supports, infill 10%, 0.2 mm layers, print slowly! There are some extension modules if you want to use long USB sticks
Print upside down

Top: with supports and with infill 25% - I printed this with 0.1 mm layers and at least 8 upp