Targa Pylon

# Targa Pylon
____
Tweaked to fit a smaller LED and a battery holder.
Goes with https://www.thingiverse.com/thing:483836

Parts:
- [47 Ohm resistor](https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/MRS16000C4709FCT00/7351373?s=N4IgTCBcDaIEYGMDMBOALEhAXAtAOwBMQBdAXyA)
- [20mm coin cell battery holder](https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/1775485-1/4021677)
- [single-pole double throw slide switch](https://www.digikey.com/en/products/detail/e-switch/eg1201a/101723)
- [3mm yellow LED](https://www.digikey.com/en/products/detail/lite-on-inc/ltl-4251nlc/3198535)
- 28AWG stranded wire

Connect the switch's leftmost lead to the resistor, then connect the resistor to the positive side of the LED. I wrapped it in heat shrink so it doesn't touch the negative side. Then the ground on the battery holder goes to the negative lead on the LED, and the positive side on the battery holder goes to the center lead on the s