Slicer Discord
TARS- Interstellar: Print-In-Place – 3D-Druckmodell von MakerWorld MakerWorld
Characters

TARS- Interstellar: Print-In-Place

3.1k Downloads
1.2k Likes
1.9k Makes
Zum Modell
TARS- Interstellar: Print-in-place--------------------------------------------------UPDATE:New TARS- Interstellar: Stand. Under 25 min print!Now including KIPP and CASE versions!Both versions have their text extruded for multi-color compatibilityv1.1 now has stronger interior supports for better reliability.About:Created in Fusion 360Printed on Creality Ender 3/Prusa Mk3s, A1Print 1x TARS BodyPrint 4x TARS PanelPrinting:Printed with no supportsLayer height of .2mmNo brim (One might be necessary, though)15% Adaptive Cubic infillAssembly:Rotating all 4 sections of TARS' Body will free themSuper Glue the 4x TARS Panel into the groovesNotice that the TARS Panel is not square, so the longer side should be glued vertically to the TARS BodyOther:If something does not work right, and I'll fix it ASAPPlease let me know if you feel the tolerances are too loose/tight!Boost MeThanks for the support!!
Kategorie
Characters
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
Print-in-place-Design · 2 Farben
Print-in-place 2 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, ASA
Farben
2 (AMS/MMU empfohlen)
Nachbearbeitung
Kleben
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Delphant veröffentlicht auch auf

52 zusätzliche Modelle auf 3 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen