Thingiverse

"Tartarus" Model Rocket

door HellforgeActual

40 Downloads

29 Likes

2 Makes

Welcome to "Tartarus" Hobby Rocket!

Features:
= Nose cone coupler for increased parachute storage!
= Optimized stabilization fins!
= 22.5 Degree gyroscopic stabilizer fins for straight flight (will provide version without)!
= Perfectly sized fin body for F sized Estes Black powder Engines!

Instructions:
- Print using the Ready To Print model provided. See print settings.
- Glue the nose cone coupler to the fin body and motor housing (super glue recommended)
- Prepare your parachute (use a premade, or make a tablecloth parachute, see link)

https://www.youtube.com/watch?v=CISZ7RUye5w

- Attach your shock string to the inside of the nose coupler, and the other end in the nose
- Mount your parachute to the shock-string
- Glue Engine holders to the side body of the F sized estes engine exactly 180 degrees from eachother
- Slide the engine holders with the engine into the designated slots at the back of the rocket

You will have to add your own launch mechanism. Du

Estes Estes engine estes motor estes rockets Gyro rocket Gyro stabilized hobby rocket hobby rocketry model rocket model rocketry rocket Estes Estes engine estes motor estes rockets Gyro rocket Gyro stabilized hobby rocket hobby rocketry model rocket model rocketry rocket

Bron

Thingiverse

Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid

Eendelig

Supports 1/3

Montage 0/3

Instellingen 1/3

Bedgrootte 0/3

Nabewerking 1/3

Printer

FDM / FFF

Bestandsformaat