Tauriel - The Hobbit

It's Tauriel… from The Hobbit! You may scale this on the X/Y axis but NOT the Z axis. Let me know if you need a custom size and I can create it in Hueforge for you so you don't lose any detail. The print profile includes everything you need, if you want to manually configure things read below:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x147mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Overture Black Transmission Distance: 0.7 PLA SUNLU Flourescent Orange Transmission Distance: 7 PLA Kingroon Skin Transmission Distance: 3.7 PLA SUNLU White Transmission Distance: 10This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Flourescent Orange At layer #11 (0.96mm) swap to Skin At layer #13 (1.12mm) swap to White for the rest.