taylor swift hueforge

Project: tailor.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #11 (0.96mm) swap to GrayAt layer #13 (1.12mm) swap to Jade White for the rest.Do not Adjust Z axis it will ruin the print