Tazmanian Devil

Tazmanian Devil, commonly referred to as Taz is from Warner Bros.' Looney Tunes and Merrie Melodies cartoons. Taz is generally portrayed as a ferocious, albeit dim-witted, carnivore with a notoriously short temper and little patience. Though he can be very devious, he is also sweet at times. Taz has an ability to spin like a vortex and bite through nearly anything. He does have one weakness, he can be calmed by almost any music. No supports are required. If you have the proper filament colors, no painting is needed. The assembled model is 270mm tall. Enjoy! ........................................................................................................... **Print Instructions:** Supports: No Resolution: .2mm Infill: 10% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... **Building the model** Colors Black: (Paramount3D PLA - Black) eye_blacks (contains two pieces) nose eyebrows whiskers (contains six different pieces laid out for assembly) .. Dark Brown: (Hatchbox PLA - Brown) body .. Light Brown: (Paramount3D PLA -Dark Complextion) face .. Green: (Paramount3D PLA - St Andrews Green) base .. White: (Overture PLA - White) eye_white_left eye_white_right teeth_top (contains six different pieces laid out for assembly) teeth_bottom (contains six different pieces laid out for assembly) .. Pink: (CookieCad PLA - Pale Pink) ear_right ear_left .. Dark Red: (Paramount3D PLA - Iron Red) mouth_right mouth_left .. Light Red: (Paramount3D PLA - Volcano Orange) tongue .. Clear: (Unknown PLA - Cyrstal Clear) whirlwind .. ........................................................................................................... **Printing and assembly tips** Printing tips 1 - No supports are required. 2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, e