TB6560 driver mount

Mounting block for 4 TB6560 stepper motor drivers.
Designed to fit originally in this box

Also is equipped with two 50x50 fans mounted directly towards the cooling blocks of all 4 driver boards.

You might need to add a drop of silicon glue in between the top of the fans and the cover plate so as to eliminate any vibrations while they are ON.

The motor cables can run from the bottom (If you add 4 spacers while mounting the block on the box you can have enough clearance to do so) and the signal wires can run on the top.

You can remix it to change the mounting spots or you can just mount it as is.
Both ways work just fine.