Thingiverse
TBS SourceOne V3 7" Prints
von chaserporter
3
Downloads
5
Likes
0
Makes
Our local MultiGP Chapter has started having a heat of 7" racing. The TBS Source One V3 7" is a great budget frame to get in to this style racing, but I didn't find many race inspired print designs. All designs should be printed in TPU, other than the battery support washers.
The Arm Guards should fit 6mm standard and dead-cat style arms. These have slots on the bottom for these tinysleds: https://tinysleds.com/products/6s-x-class-led. The motor protection is designed to fit up to 28xx motors. Print with support.
The bottom mount battery support helps to stabilize a big 2200mah 5 or 6s battery and prevents the screws from digging in to the battery. The battery support washers should be printed in something other than TPU because they help to prevent the screws from pulling through the main support.
I have included two FPV camera mounts: Foxeer Predator V5 nano with 13mm lens, and Runcam/HDZero Micro V1. I can probably make modifications if I'm given the lens diameter, camera b
The Arm Guards should fit 6mm standard and dead-cat style arms. These have slots on the bottom for these tinysleds: https://tinysleds.com/products/6s-x-class-led. The motor protection is designed to fit up to 28xx motors. Print with support.
The bottom mount battery support helps to stabilize a big 2200mah 5 or 6s battery and prevents the screws from digging in to the battery. The battery support washers should be printed in something other than TPU because they help to prevent the screws from pulling through the main support.
I have included two FPV camera mounts: Foxeer Predator V5 nano with 13mm lens, and Runcam/HDZero Micro V1. I can probably make modifications if I'm given the lens diameter, camera b
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
