TBS Vendetta Custom camera mount

I made this mount to be able to use my runcam 2 on my vendetta without having around 30% of the view blocked by the front bumper. The tbs zerozero with default lens is a few mm longer than the newer cameras, so this moves the camera forward so that the lens is placed in a place where it sees past the bumper.

Its a bit thicker than the original tbs camera mount since I used the normal elegoo resin to print it, and am hoping that this will help it survive a bit longer.

I also tried it on a foxeer arrow v3, and it fits nicely as well.

Print resolution should be 0.050mm, since the M2 threads are actually embedded in the model and come out nicely out of the printer.

I have included the camera mount stl and ready to print with supports. Just to be clear, two mounts are needed to mount a camera.

Print, peel off supports (start from the thick round part and all supports should just pop off), cure, and finish up with some uv protective varnish.


Mounting instructions:
- remo