Slicer Discord
tea pot warmer – Modello 3D stampabile da Thingiverse Thingiverse

tea pot warmer

di horaz
20 Download
14 Likes
0 Makes
Vai al Modello
Tea pot warmer with cork for heat absorption
Since it seems that there are different shapes and forms of tealights I decided to go with a square

if you want hold the tealight in place you could put a a thin cork plate ontop the first one with a circular hole for the light and glue those two layers together

## Parts you need
- 4x M3 nuts
- 4x M3 cylinder head screw, length can be from 10mm to about 18mm
- cork (I used 5mm thick plate, use what you have around)

## Steps

1. print all parts
1. drill the holes in stands of the bottom part (I added a single support layer in the model)
1. prepare the cork:
1. 60mm x 60mm square cork plate for the bottom
1. ring with outer diameter 151mm and inner diameter 100mm
1. (I added cut helpers so you can get the circles aligned)
1. use some sanding paper to make the cutted parts smoother
1. put the nuts in square holes in the lower part
1. put the top part ontop to bottom part and use the screws to fix it in place (t
Fonte
Thingiverse
Cosa serve per stampare: Intermedio Bassa affidabilità
Perché?
post-lavorazione significativa
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 3/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA, ABS
Piano min.
50 mm (Piccolo)
Post-elaborazione
Levigatura, Incollaggio, Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione