Thingiverse
Tealight UFO
por HoofiePuppet
3
Descargas
4
Likes
0
Makes
A simple tealight UFO!
Print:
Print all parts at 15% infill. Only the hatch and the UFO need supports but you can probably get away without them. The cone (beam) should be printed in spiralize mode for thin walls and using translucent or glow in the dark PLA.
Assembly:
Glue in the "balls" around the perimeter of the UFO. Glue to the bottom of the UFO to the cone, if you want but it's not necessary. Put a tealight in the top and put the hatch over it.
Enjoy!
////////////////////
SUPPLEMENTAL:
If you're into robotics and security stuff, please consider joining my forum and assist in building a home defense robot at www.comsecdefense.com.
https://youtube.com/shorts/SRUdGjYGWiY
Print:
Print all parts at 15% infill. Only the hatch and the UFO need supports but you can probably get away without them. The cone (beam) should be printed in spiralize mode for thin walls and using translucent or glow in the dark PLA.
Assembly:
Glue in the "balls" around the perimeter of the UFO. Glue to the bottom of the UFO to the cone, if you want but it's not necessary. Put a tealight in the top and put the hatch over it.
Enjoy!
////////////////////
SUPPLEMENTAL:
If you're into robotics and security stuff, please consider joining my forum and assist in building a home defense robot at www.comsecdefense.com.
https://youtube.com/shorts/SRUdGjYGWiY
HoofiePuppet también publica en
8 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
