Tech forks tool kit

Many tools for these found on trials motorcycles tech forks.Air Gap Tool.stl > This rule for setting air gap on forks. After printing the rule, you will need an small lenght of bowden tube [De=4mm; Di=2mm] and an syringe.Cap wrench.stl > Wrench for removing top cap without leaving marks on cap.Funnel 39.stl > Funnel to help with oil pouring on forks.Internal wrench alum 13.stl; Internal wrench alum 20.stl; Internal wrench steel 13.stl and Internal wrench steel 20.stl > These tools are for holding internal cartridge while unscrewing bottom bolt. Since internals are diffrent for aluminium forks [black or brownish color] and steel forks [chrome or gold color] there are tools for aluminium and steel forks. The ones with 13 number on file namber uses square 1/2" from any socket driver set but can not be used on hydraulic side. I made these tools because not everybody will have access to the needed tube for tools ended with 20. Tolls ended with 20 number use a lenght of square 20mm x 20mm tube [wall 1,5mm] commercially known as "metalon" tube. This is the best option because tool is hollow and can be used on both sides of suspension. You need to print ony one of these four files according to your choice.cone.stl > I noticed that some forks, on hydraulic side, the hex for preventing damper rod from rotating does not exist. In it place there are an conical section. This part fit on this conical section and has an 19mm hex where internal wrench alum fit perfectlySeal driver.stl > Tool for mounting fork bushing on one side and seals on the other side.Wall support.stl > Use this hook if you want to place yours forks safelly upright near any wall while doing maintenance.Leg holder part 1.stl; Leg holder part 2.stl; Leg holder single.stl > Vise insert that is used to hold suspension legs securely while making maintenance and preventing damage to your suspension bottom part. You can choose printing part 1 plus part 2 [part 2 in TPU] or printing only part "