Thingiverse

Technoblade Memorial Repaired for FDM

by DradisPrints

6 Downloads

7 Likes

0 Makes

Fixed DJScope's version to make it printable on my FDM. Prints at 3 1/2 inches tall or higher. Supports must be used! My daughter is a huge fan of Technoblade and I fixed this so I could print it for her. I make my fixed verson available for the rest of his fans here.

My Fixes (verified at 3 ½ inches or 8.9 cm tall):

-Minimum thicknesses of parts set to 1mm.

-Scaled to 3 ½ inches tall or 8.9 cm

-Repaired mesh errors.

-Reduced detail to make printable.

My tested print settings (took 5hrs):

-.2mm to .32mm variable layer height (the base at .32).

-Painted on supports for 35-degree parts.

-Printed at 3 ½ inches tall.

-10% support cubic infill.

-Perimeters set to 2.

-Printed with Overture PLA.

I recommend if you are not conformable using painted supports or variable layer heights, use .2mm and supports everywhere. I also recommend you set the support overhang threshold to 45-degrees because the back angle of the cape can be tricky if your ad

DreamSMP Technoblade

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

5 h

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

DradisPrints also publishes on

14 additional models across 2 more platforms

Frequently Asked Questions

Which 3D printer is suitable for Technoblade Memorial Repaired for FDM?

Any FDM printer should handle Technoblade Memorial Repaired for FDM just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Technoblade Memorial Repaired for FDM?

According to the design notes, Technoblade Memorial Repaired for FDM takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Technoblade Memorial Repaired for FDM available in?

Technoblade Memorial Repaired for FDM is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Technoblade Memorial Repaired for FDM free to download?

Yes, Technoblade Memorial Repaired for FDM is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Technoblade Memorial Repaired for FDM

Add to Collection