Thingiverse
Telescoping Flag Pole
di JBA_411
12
Download
25
Likes
0
Makes
I wanted to create a way to travel with my flag pole for music festivals but not have it be 10ft one piece. So I designed Telescoping rings that fit onto 1.25"/1"/0.5" PVC pipe and allows each subsequent pipe to be stored inside the other and raised up when needed.
The bottom bolts of each ring hold the ring to the PVC piping. The top rings are what hold the nested PVC pipe in place when raising and lowering.
1.25" PVC = Ring OD-49mm IDBtm-43mm IDTop-34mm.stl
1" PVC = Ring OD-40mm IDBtm-34mm IDTop-22mm.stl
0.5" PVC = Ring OD-28mm IDBtm-22mm IDTop-13mm
The smallest ring was created so that a pole topper could be inserted if desired.
No-Tangle flag rings were created to go with the 1/2" pole size.
For the Telescoping Rings and Flag rings I utilized "NUT JOB" from mike_mattala to make the thumb bolts and nut inserts in the rings.
https://www.thingiverse.com/mike_mattala/designs
https://www.thingiverse.com/thing:193647
The flag clip is a derivative of "S-Carabin
The bottom bolts of each ring hold the ring to the PVC piping. The top rings are what hold the nested PVC pipe in place when raising and lowering.
1.25" PVC = Ring OD-49mm IDBtm-43mm IDTop-34mm.stl
1" PVC = Ring OD-40mm IDBtm-34mm IDTop-22mm.stl
0.5" PVC = Ring OD-28mm IDBtm-22mm IDTop-13mm
The smallest ring was created so that a pole topper could be inserted if desired.
No-Tangle flag rings were created to go with the 1/2" pole size.
For the Telescoping Rings and Flag rings I utilized "NUT JOB" from mike_mattala to make the thumb bolts and nut inserts in the rings.
https://www.thingiverse.com/mike_mattala/designs
https://www.thingiverse.com/thing:193647
The flag clip is a derivative of "S-Carabin
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!