Temp Controlled Build Enclosure for UM2

Parts

1200 X 600 X 3mm Sheet (PVC, Acrylic etc.)
12V 40mm Fan
12V Power Supply
Chassis socket (to suit 12V Power Supply plug)
temperature controller on ebay http://www.ebay.com/itm/9-C-99-C-DC-12V-Intelligent-Digital-Led-Thermostat-Temperature-Controller-/321723841989
Clear Drying Glue
5 metres 6mm X 9mm white door seal strip
Clear Packaging tape
Masking Tape or similar
4 - 20mm X 4mm Screws
67 - 10mm X 3mm Screws
9 - 16mm X 3mm Screws
3 - 25mm X 3mm Screws
9 – 3mm nylock nuts
3mm washers
2 magnets to hold door one needs to be thin.

Instructions

Download Pictures for Instructions zip file and STLs zip file from http://www.thingiverse.com/thing:2137342/#files
I printed all parts in ABS with 2mm walls and thicker for hinges
Cut out panels from sheet to nearest mm
Print joiners, all front door parts, door frame mounts and joiner first
Mount front door hinges by replacing current UM screw with a 16mm screw on each one
Use a 16mm Screw for the front door handle