Temp tower for labelling

**temp-tower v1.stl**
Designed for 0.2 layer height which equals 3 layer bridges & a 3 layer base.

8mm section height (40 layers)

Suitable for 0.1, 0.2, 0.4mm nozzles

2x wide on one side so you can Sharpie the starting temperature on.

-----

**Added 2 additional variations both without text on the sides**.

...04noz_02layer.stl = 0.4 nozzle & 0.2 layer. Can be used with 0.1 and 0.2 nozzles also.

...06noz_03layer.stl = 0.6 nozzle & 0.3 layer. Can be use with 0.1 and 0.3 nozzles.