Tempest Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 146.18x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2mmFilaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA SMARTMATERIALS Blue Transmission Distance: 3.5 PLA KINGROON SILVER Transmission Distance: 1.2 PLA SMARTMATERIALS White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #12 (1.04mm) swap to SILVER At layer #17 (1.44mm) swap to White for the rest.