Tena testa Case

This is a case I did for a simple project that is used to test your antenna. The kit can be found here https://sites.google.com/site/zl1cvd/tenatesta

The case is wider than the actual Tena Testa to allow the Tena Testa to be tilted to get the 3 buttons into the case. The case will need a piece of non conductive foam to secure the Tena Testa moving around. Put this between the case cover or back and then Tena Testa PWB. I made it a little extra deep to account for standoff screws. I would use at least 1 standoff on the Tena Testa PWB opposite of the LCD connector. This help support but I did not add a screw to the standoff on the LCD.