Tenting base for nomad split keyboard

This is a tenting base for the wonderful Nomad split keyboard designed by Fiendie.(please do not look the keyboard, it's a wip) Since this is an add-on to the original design, the base is press-fit on the case designed by Fiendie, so be very careful about dimensions; if in doubt, I'm providing a test perimeter to check the tolerance, also use a material that can handle some force, like PETG. I went for a design where you can choose your tenting, using a longer or shorter M5 screw with hex head.The screw I used is a 35 mm and the tenting is around 10°. The gyro design allows for 0 to 30° (circa), but for stability I wedged some purge line to make the inner sphere not free, otherwise every time you move the keyboard the feet would bend. The gyros are printed with the nut hole upward, but you should turn that downward when in use. References:the Nomad keyboard github page: https://github.com/fiendie/NomadKeyboardFiendie's top case: https://makerworld.com/en/models/1340007-noma