MakerWorld
2D Art
Zum Modell
Terminator
38
Downloads
20
Likes
10
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 400x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 2.7mm and the Actual Depth is 2.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue Gray At layer #16 (1.36mm) swap to Silver At layer #18 (1.52mm) swap to White At layer #22 (1.84mm) swap to Red for the rest. Also, in my photo I posted I had my prints in a frame that is on Canadian Gamer @CanadianGamer page
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!