MakerWorld
Other Props & Cosplays
Ver Modelo
Terminator T800 Animatronics
166
Descargas
98
Likes
29
Makes
Here is a nice Terminator T800 animatronics with red eyes and a moving jaw!I should mention that the original file I based the head on is Landru's famous file: https://www.thingiverse.com/thing:18317.All credits and compliments for the drawing are his.I only fixed the jaw and added the electronic part.Components:Wemos D1 Mini: Development board based on the ESP8266 microcontroller.2 LEDs: Representing the eyes of the Terminator T800.Mini Servo G90: Used to control the movement of the jaw.Resistors (2 x 220Ω): For limiting current to the LEDs.Wires: For connecting components.Connections:LEDs:LED 1 (Left Eye):The positive (anode) terminal of the LED connects to pin D1 (GPIO5) of the Wemos D1 Mini.The negative (cathode) terminal connects to GND through a 220Ω resistor.LED 2 (Right Eye):The positive (anode) terminal of the LED connects to pin D2 (GPIO4) of the Wemos D1 Mini.The negative (cathode) terminal connects to GND through a 220Ω resistor.Mini Servo G90:The control wire of the se
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!