Terraforming Mars Storage Solution BOXES MODIFIED

I Did a redesign of TheCutter's awesome designs. specifically, all the storage boxes that have lids and magnets.

The reason I did this is because in his original design there was a requirement to stop the print and install the magnets, then resume the print. This wouldn't really work for me as I would end up just forgetting about it and the whole process would take way too long. Plus I wanted to learn fusion360, this was my first kick at the can with it.

The boxes still use 4mmx2mm magnets, one in each corner. I stayed with this size as I was able to get 200 of them on amazon for about $12. I'll use them in future projects.

What I Did:

- Imported the STLs into TinkerCad to get the overall measurements

- Built the Boxes in Fusion360 making small changes such as:

- Moved the location of the magnets up to be flush with the finish surface of the box. the recesses for the magnets have a diameter of 2.1mm. worked for my setup without glue. other made need a dab of