Test Cube for Filament Temperature

This 25x25mm Cube is 100mm high and can be used for finding the best temperature for your Filament.

For the resolution I decided to set 0.15mm, so it lays between the most used resolutions 0.1mm and 0.2mm. But you can set the resolution to your needs.

I started with the highest Filament temperature at the bottom and decreased the print temperature in 10°C (and 2°C) steps every 10mm up to the top.

For example (for my used Filament 190°C - 220°C):
Start with 220°C and lower the temperature every 10mm, ...215°, 210°, 205°, 200°, 198°, 196°, 194°, 192° and 190° at the end. Therefor see the picture where I singed every single 10mm.

PS.: do not wonder, I did a filament change during the print. Same manufacturer, same temperature range.

Have fun!