Test Tower (speed flow or temp)

Finding the sweet spot for your filament is not always easy and most test print tower take a while to print and use a lot filament.. so this is just a very quick way to see where to aim .. you can do more detailed and larger tests later not wasting time and money.This tower can be sliced in vase mode and either sit by your printer and change a setting every 5mm (speed, temp, flow/multiplier) and note down the height or letterOr change the g-code directly.Or use a script in your slicer to change a setting every 5mm. This test is challenging even with the best settings/printer, so don't wonder if none of the Segments looks perfect - just select the best looking segment/setting - it will show you the limits.How to proceedFirst print one with coarse settings like 200°, 210°, 220°… then a fine one with values around the best result to narrow the sweet spot further down 205°,206°,207°… You have 10 Segments so this is just 50mm tall and you don't need a 100mm long bridge to see if it