Tevo Tarantula BLTouch Support

This mount was designed to limit the amount of offset. It holds the BlTouch between the wheels of the X-Carriage, this way you can probe automatically the whole bed.

I first used the 5mm offset without shield and encountered heat issues. This is how I discovered the other mount (linked below). I've decided to add a shield, this solution seems to work !

There is two different mounts : 5/3mm offset (from the wheel axis), meaning that the 5mm is closer to the hotend :)

UPDATES :
2018-03-29 : I've lowered the cable holes of the shield to avoid squeezing the cables

I haven't printed ABS and I would recommend printing the mount out of ABS if you plan using high temperatures.

I also left the original design since you can protect the sensor with this type of socket :
https://fr.aliexpress.com/item/SWMAKER-1pcs-NEWEST-Silicone-Socks-Heater-Block-cover-Silicone-Insulation-for-Replicator-Anet-Prusa-i3-MK7/32828316321.html

Offsets :
- 5mm OffSet : Y+18 (SENSOR_BEHIND 18)