Thingiverse
TFT-ScreenEnclosure 10.1"
door Sisul
2
Downloads
3
Likes
0
Makes
I was able to take over the display from a defective tablet. It is an 'Innolux 10.1" TFT Display EJ101IA-01G'. For this I got a replacement controller 'TFT-Controller PCB-800815'.
Since my 3d printer is too small, I had to print some elements in 2 parts. I then glued the parts together, using 2 pins each with D=3mm as guides.
For illustration I have attached the assembly as a step file.
Parts list display housing:
- TFT display EJ101IA-01G
- TFT controller PCB-800815 and keypad PCB-800023
- Plastic adhesive
- 16 x screws M3 x 5
Parts list stand:
- 4 x screws M4 x 8
- 1 x screw M5 x 30
- 1 x nut M5
Since my 3d printer is too small, I had to print some elements in 2 parts. I then glued the parts together, using 2 pins each with D=3mm as guides.
For illustration I have attached the assembly as a step file.
Parts list display housing:
- TFT display EJ101IA-01G
- TFT controller PCB-800815 and keypad PCB-800023
- Plastic adhesive
- 16 x screws M3 x 5
Parts list stand:
- 4 x screws M4 x 8
- 1 x screw M5 x 30
- 1 x nut M5
Sisul publiceert ook op
24 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
