TFT32 external box for enclosure

This is still a WIP If you print one please post pics. I posted this version before I went ahead and chopping it up to be printable on a Monoprice delta mini. the small blocks are intended to be mounted flush with the surface of your basis for enclosure, I am using the ubiquitous Lack enclosure. the bradlike items are rivets that used to so through the 4 holes on the flush area on the backside and then glued into the 4 blocks earlier recessed onto the enclosure. the last 2 blocks in the enclosure are intended to be attached to the next module using 3mm abs filament. None of this is tested. I will put up the small bed version along with the rest of the modules, as I finish them.

Haven't had time since I noticed this to fix it, if you are going to print this. The blocks for attaching the rivets need to be lowered a couple of mm so they aren't in midair.

8/3/19 - Modified the design slightly there will be 2 available the First set will be broken up since the new set needs everythin