Thingiverse
TFT35 USB Cover
von theLinkr
7
Downloads
1
Likes
0
Makes
The USB on the TFT E3 is a bit fragile, and if you were to accidentally bump your USB stick while its inserted (like I did) it will probably come loose or break off. I designed this to hold the USB in place if you cant reattach it any other way. Unsure why the Thingiviw will not generate
CAUTION: Tolerances are very tight. Be very careful. I've updated a newer version that should be a bit more lose around the edges of the USB and SD slot, but haven't tested it. Clip/sand down the corners if needed
CAUTION: Tolerances are very tight. Be very careful. I've updated a newer version that should be a bit more lose around the edges of the USB and SD slot, but haven't tested it. Clip/sand down the corners if needed
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!