Thales Liberty Programming Cable

This is a programming adapter designed by myself. Programming cables and adapters are hard to find and when you do they cost way too much for what the radio is. This is as simple as it gets. I used a resin printer and the quality is great. Print the connector and pin holder. The pin holder sits inside of the connector and you will have to glue it in. Be sure to put the usb cable through the hole in the connector first. The pinout provided is looking at the radio so be sure to do the opposite. You can use pins from a motorola jedi connector or some pogo pins from ebay. They stick through the back. Sometimes I use a little super glue after i solder the wires to the pins. After that is dry I like to use some hot glue to make sure they are secure. Then you can glue the pin holder into the connector. The screw is a 6-32.