The Bookworm

I saw a relative's drawing on Facebook and said to myself, that will look stunning as a Hueforge, so I got her to email the drawing to me, and with her blessing I turned it into a Hueforge which I've named "The Bookworm".It's very striking in only Black & White, and I hope you'll appreciate her art as much as I do!This one's for you Leata!*What's really nice about this print, is that it can be printed on any printer since it only requires two colours, but better still, it only does one colour change, making it really easy to print.Project: BookwormPrinted on Creality Hi.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.The Model is 141.25 x 200mm in size.You may print at higher layer heights below the base thickness of 0.48mm.The Max allowed thickness is 2.24mm and the actual thickness is 1.44mm. Filaments Used: Generic PLA Black Transmission Distance: 0.2 Ender PLA White Transmission Distance: 5.5 Swap Instructions: Start with Black.At layer #10 (0.88mm) swap to White for the rest. Print time:4 hours and 9 minutes - bear in mind its a large Hueforge.Of course this Hueforge wouldn't be as good as it is without the help of Russell @JunkHouse, thanks my bud!