Slicer Discord
The Boxer – 3D-printbaar model van MakerWorld MakerWorld
Sculptures

The Boxer

16 Downloads
8 Likes
10 Makes
Model downloaden
The wonderful bronze statue of the Boxer (or Boxer at rest or Boxer of the Baths or Boxer of the Quirinale), is a 128 cm high Greek sculpture, dated to the second half of the 4th century BC and hypothetically attributed to Lysippus (Sicion, 390/385 BC - after 306 BC). Found in Rome on a slope of the slopes of the Quirinale in March 1885, in the area that may have belonged to the Baths of Constantine.The statue is preserved at the National Roman Museum.The discovery of the statue, which took place at a depth of 6 meters, is described as follows by archaeologist Rodolfo Lanciani, at the time secretary of the Municipal Archaeological Commission:«The most important fact collected, while I was present and following the removal of the earth in which the masterpiece lay buried, is that the statue had not been thrown there, or buried in a hurry, but had been hidden and treated with the utmost care. The figure, being in a sitting position, had been placed on a stone capital of the Doric order,
Categorie
Sculptures
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Gemiddelde betrouwbaarheid
Waarom?
supports nodig · grote print
Eendelig Supports vereist
Supports 2/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Min. bedgrootte
200 mm (Groot)
Software
Cura, PrusaSlicer of vergelijkbaar
Veelgestelde vragen
Welke 3D-printer is geschikt voor The Boxer?
Elke FDM-printer zou goed overweg moeten kunnen met The Boxer. Het is geprint op machines zoals Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. Een minimaal bouwvolume van 200 mm wordt aanbevolen.
Heeft The Boxer supports nodig bij het printen?
Ja, The Boxer heeft waarschijnlijk supports nodig vanwege overhangen en geometrie. We raden boom-supports in je slicer aan voor makkelijker verwijderen. Schakel supports in in Cura, PrusaSlicer of Bambu Studio vóór het printen.
In welk bestandsformaat is The Boxer beschikbaar?
The Boxer is beschikbaar in het formaat STL. Deze bestanden kunnen worden geopend en geslicet met gratis software zoals Cura, PrusaSlicer, Bambu Studio of OrcaSlicer voor FDM-printen, of ChiTuBox en Lychee Slicer voor resin-printen. De download wordt aangeboden via MakerWorld.
Is The Boxer gratis te downloaden?
Ja, The Boxer is gratis te downloaden via MakerWorld. Controleer altijd de licentie op het oorspronkelijke platform om commercieel gebruik, remixen en naamsvermelding te begrijpen.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie