MakerWorld

Sculptures

The Buddha

by 3D Miker · Sculptures

183 Downloads

81 Likes

64 Makes

Go to Model

一款大日如来佛祖，心中有佛，便是与佛结缘，无需在意形式，心诚者灵。1.配置已切片好，直接打印即可。2.支撑少，好拆。为我助力原创不易，希望大家多多助力支持，谢谢！💗

Category

Sculptures

Source

MakerWorld

Published

27.11.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for The Buddha?

Any FDM printer should handle The Buddha just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does The Buddha need supports when printing?

Yes, The Buddha will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is The Buddha available in?

The Buddha is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is The Buddha free to download?

Yes, The Buddha is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

The Buddha

Similar Models

Add to Collection