The Chaplain - Hueforge - 5 Colors

Bring grimdark majesty to your walls with this stunning 5-color filament painting! Designed specifically for Hueforge enthusiasts, this model blends rich textures and striking contrast seamlessly. It is incredibly easy to print with standard 0.4mm nozzles and requires absolutely zero supports. Upgrade your gaming room or office setup with a unique, textured masterpiece that perfectly showcases the artistic power of 3D printing. 🎨💀   You can find my other models of the same type on my profile.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.48mm     #080a0d PLA PolyLite Black Transmission Distance: 0.3     #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5     #c00d1e PLA BambuLab Basic Red Transmission Distance: 4     #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6     #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions:     Start with Black     At layer #10 (0.88mm) swap to Cyan     At layer #12 (1.04mm) swap to Red     At layer #17 (1.44mm) swap to Yellow     At layer #22 (1.84mm) swap to Jade White for the rest.