The Craft Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.28x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Brown At layer #13 (1.12mm) swap to BeigeBorder Only Colors from here until the end. At layer #23 (1.92mm) swap to Ivory White for the rest.