The dalton HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150.06x120.15mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA Generic Recicled Black Transmission Distance: 0.6 PLA Generic Recicled White Transmission Distance: 5 PLA Generic Recicled Yellow Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #12 (1.04mm) swap to Black At layer #17 (1.44mm) swap to Yellow for the rest.