The Dungeonmaster Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.01x112.54mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Marine BlueBorder Only Colors from here until the end. At layer #18 (1.52mm) swap to Ivory White for the rest.