Thingiverse
The Eagle Ship
von AstroSurfer2025
0
Downloads
3
Likes
0
Makes
Super Cool Space Ship inspired by an eagle.
IMPORTANT: Please look at the list I have below for which pieces to print, the main body has 2 different ways you can print it out. The original ship size is pretty big, I would recommend printing it at 30% of its original size (you can print larger if you would like).
IMPORTANT: I encourage you to use a 2mm nozzle for the inner engine piece if you want to capture the design, NOTE: Check your slicer to make sure all details can be printed.
SUGGESTION: For the larger pieces, any size nozzle should be fine depending on how big you want to print this ship, I would check to make sure the size % you choose can fit on your printer because the body pieces are long.
WALLS/FITTING: Use 1 or 2 walls, basically just make sure your pieces can fit together, if need be, change the size of some pieces relative to where they fit if you don't think you can make everything fit together at the same % size.
GLUE: I recommend plastic glue and a clamp for
IMPORTANT: Please look at the list I have below for which pieces to print, the main body has 2 different ways you can print it out. The original ship size is pretty big, I would recommend printing it at 30% of its original size (you can print larger if you would like).
IMPORTANT: I encourage you to use a 2mm nozzle for the inner engine piece if you want to capture the design, NOTE: Check your slicer to make sure all details can be printed.
SUGGESTION: For the larger pieces, any size nozzle should be fine depending on how big you want to print this ship, I would check to make sure the size % you choose can fit on your printer because the body pieces are long.
WALLS/FITTING: Use 1 or 2 walls, basically just make sure your pieces can fit together, if need be, change the size of some pieces relative to where they fit if you don't think you can make everything fit together at the same % size.
GLUE: I recommend plastic glue and a clamp for
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!