Slicer Discord
The Flash – AMS Multicolor – 3D printable model from MakerWorld MakerWorld
Characters

The Flash – AMS Multicolor

64 Downloads
37 Likes
10 Makes
Go to Model
BeschreibungGesamt Höhe: ca. 20cm (nach dem Zusammenbau) The Flash steht seit Jahrzehnten für Tempo, Witz und Herz. In der Serie begleitet man Barry Allen – den Forensiker, der nach einem Laborunfall zur „Schnellsten Person der Welt“ wird. Doch Flash ist mehr als Speed: Er ist Team-Player, Wissenschaftsnerd und unermüdlicher Optimist. Mit jeder Rettung, jedem gescheiterten Zeitreise-Experiment und jedem neuen Gegner (Reverse-Flash, Zoom, Savitar…) wächst er vom unsicheren Rookie zum Anker seiner Crew.Diese FanArt-Pose fängt genau das ein: Vorwärtsdrang, Energie, Blitz-Akzente – bereit, in die nächste Timeline zu sprinten. Mein Profil liefert die Mehrfarb-Zuordnung und ein druckfreundliches Setup, damit der Suit, Gürtel und Emblem zum Vorschein kommen – direkt aus dem AMS.Empfohlene Druckeinstellungen (Bambu, 0,4 mm) (bereits in der 3MF Datei vor konfiguriert)Schicht: 0,20 mmPerimeter: 3Top/Bottom: 6/6Infill: Gyroid 10%Naht: RückseiteDünne Wände erkennen: AnSupports: Baum(auto), organis
Category
Characters
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
supports needed · 2 colors · large print
Single piece Supports required 2 colors / AMS
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
3MF
Material
PLA
Min. bed size
200 mm (Large)
Colors
2 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for The Flash – AMS Multicolor?
Any FDM printer should handle The Flash – AMS Multicolor just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.
Does The Flash – AMS Multicolor need supports when printing?
Yes, The Flash – AMS Multicolor will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is The Flash – AMS Multicolor available in?
The Flash – AMS Multicolor is available in 3MF format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is The Flash – AMS Multicolor free to download?
Yes, The Flash – AMS Multicolor is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection