The Flash HueForge (5 colors)

5 Color HueForge: The FlashPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x226mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.6mm and the Actual Depth is 2.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 6.1 PLA BambuLab Basic Yellow Transmission Distance: 5.2 PLA BambuLab Basic Jade White Transmission Distance: 3.4This print uses 5 unique filamentsTo achieve the 5th color (white) with only one AMS, before printing assign it to the black slot. (Slot 1) After the black has printed replace it with the white spool before the white is needed. Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Orange At layer #22 (1.84mm) swap to Yellow At layer #25 (2.08mm) swap to Jade White for the rest.Boost MeBoosts are greatly appreciated.