MakerWorld
Hueforge & Lithophane
Model downloaden
The Flash
8
Downloads
12
Likes
1
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 90x160mm in size You may print at higher layer heights below the Min Depth of 0.88mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 3.9PLA BambuLab Basic Orange Transmission Distance: 6.9PLA BambuLab Basic Yellow Transmission Distance: 5.9PLA BambuLab Basic Jade White Transmission Distance: 4.7 This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to RedAt layer #20 (1.68mm) swap to OrangeAt layer #22 (1.84mm) swap to YellowAt layer #25 (2.08mm) swap to Jade White for the rest.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
