The Ghost Rider

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White At layer #21 (1.76mm) swap to Yellow At layer #26 (2.16mm) swap to Orange At layer #28 (2.32mm) swap to Red At layer #34 (2.8mm) swap to Jade White for the rest. Imprima con un relleno del 100 % con una altura de capa de 0,08 mm y una capa base de 0,16 mm. El modelo mide 200 x 200 mm. Filamentos utilizados: PLA BambuLab Basic Negro (Distancia de transmisión: 0,6) PLA BambuLab Basic Blanco Jade (Distancia de transmisión: 5) PLA BambuLab Basic Amarillo (Distancia de transmisión: 6) PLA BambuLab Basic Na