MakerWorld
Hueforge & Lithophane
Voir le modèle
The Green Arrow
76
Téléchargements
81
Likes
61
Makes
Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right place, I only post photos of the actual print and not the photos they were generated from. This is part of my DC Comics colection. If you want more of the colection and get FREE *Patreon exclusive* models(like the ones below), members only models, and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D InstructionsPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Space Gray Transmission Distance: 1.4 PLA Overture White Transmission Distance: 4 PLA Overture Green Transmission Distance: 1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Space Gray At layer #16 (1.36mm) swap to White At layer #21 (1.76mm) swap to Black At layer #25 (2.08mm) swap to Green At layer #29 (2.4mm) swap to White
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !