The Joker

Project: Joker.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8c69b5 PLA Overture Matte Purple Transmission Distance: 0.7 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #eb3b41 PLA Overture Matte Red Transmission Distance: 2.5 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Purple At layer #13 (1.12mm) swap to BambuLab Green At layer #17 (1.44mm) swap to Red At layer #23 (1.92mm) swap to White for the rest. If you are only able to do 4 color then just add a pause at layer 23 instead and manually switch the real