MakerWorld
Hueforge & Lithophane
Zum Modell
THE LOST WIZARD HUEFORGE
3
Downloads
6
Likes
0
Makes
THE LOST WIZARD HUEFORGE Project: hog2.0.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #10 (0.88mm) swap to Blue Gray At layer #11 (0.96mm) swap to Marine Blue At layer #17 (1.44mm) swap to Yellow At layer #22 (1.84mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
