The MAMDalorian

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mmThe Model is 94.74x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 1.56mm and the Actual Thickness is 1.56mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #16 (0.68mm) swap to Dark Gray At layer #18 (0.76mm) swap to GreyBorder Only Colors from here until the end. At layer #22 (0.92mm) swap to White for the rest.