The Mechanic #23

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA+ Numakers Midnight Gray Transmission Distance: 0.2 PLA+ Numakers Simply Silver Transmission Distance: 0.5 PLA+ Numakers Ivory White Transmission Distance: 4 PLA+ Numakers Cool White Transmission Distance: 1.8This print uses 4 unique filamentsSwap Instructions: Start with Midnight Gray At layer #14 (1.2mm) swap to Simply Silver At layer #17 (1.44mm) swap to Ivory White At layer #24 (2mm) swap to Cool White for the rest.