The One Ring #748 Hueforge

This might take a long time to slice, and your print results may vary. Project: oneringmg748.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x208.93mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3mm and the Actual Depth is 2.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Fuschia Transmission Distance: 5 PLA+ Polyterra Red Transmission Distance: 3.5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA+ Esun Space Blue Transmission Distance: 3.5 PLA Panchroma Satin White Transmission Distance: 3.8This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Fuschia At layer #14 (1.2mm) swap to Red At layer #18 (1.52mm) swap to Savannah Yellow At layer #23 (1.92mm) swap to BambuLab Green At layer #26 (2.16mm) swap to Space Blue At layer #30 (2.48mm) swap to Satin