The Pacific Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Dark Brown At layer #14 (1.2mm) swap to Lemon Yellow Border Only Colors from here until the end. At layer #18 (1.52mm) swap to Ivory White for the rest.